Whether you are looking for a dry lubricant, wet lubricant or moly coat for your firearm, Simmons Law Enforcement, Inc. has a solution. Choose the KG Gun Care Lubricant Products listed below that best meet your firearm needs.

Click here to read our Gun Cleaning & Lubrication Application Sheet (PDF)

Click here to request a quote.

KG-5 2oz Micro PTFE Wet Trigger Lube
	Code: A605 Price: $5.95
KG-5 is a blend of our Gun oil, thinned and sub-micron Teflon. The Teflon is ground in a proprietary carrier and the added to the thinned oil base. This blend has produced an excellent lubricant especially for triggers. KG-5 provides excellent lubrication, penetration and corrosion protection. KG-5 will keep trigger pulls even and smooth.

KG-6 2oz Moly Armorkote Bore Prep
	Code: A606 Price: $8.95
Based on past and recent test resutls KG-6 was developed to offer the advantages of Moly to both reloaders and those who buy factory ammo. KG-6 is unlike the greases you are used to seeing. Formulated with Molybdenum Disulfide suspended in a fine oil, our finished product is a superior lubricant, does not need to be shaken and has an affinity for metal. KG-6 is much easier to use than the grease products presently on the market. KG-6 will embed a very thin film of Moly onto the bore that will aid in less bore fouling. Most shooters today are reporting 50 to 100 round strings without cleaning.

KG-7 2oz net weight Moly Armorkote Powder
	Code: A607 Price: $16.95
KG Products is now offering for sale the same Molybdenum Disulfide used in our Bullet Kote, Gear Kote, and Gun Kote. This is simply the best quality Molybdenum available on the market today. There are only three grades of Molybdenum Disulfide: Technical Grade, Technical Fine and Super Fine or what used to be known as Suspension Grade. KG products uses only the finest Suspension Grade or Technical Fine grades available. We have to! Our coatings are used by some of the best racers and gunsmiths around the world! Both Technical Fine and Super Fine powders work in all tumbler applications.

KG-8 2oz Micro PTFE Dry Lube
	Code: A608 Price: $9.95
THE DRY TEFLON - NO MESS LUBRICANT. Teflon Dry Lube is new technology, incorporating a highly effective P.T.F.E. Teflon. This new technology grinds the Teflon Molecule to half of its molecular weight creating a low surface tension lube. The result produces a multi purpose lubricant which greatly reduces friction and wear more effectively then the normal Teflon. Use Teflon Dry Lube where a dry no-mess lubricant is required, i.e. triggers, slides, etc. It is especially useful for conceal and carry weapons where oil can be a problem.

KG-9 2oz net weight Micro PTFE Leather Kote
	Code: A609 Price: $12.95
By incorporating our new micro technology Teflon, and a combination of fine silicone lubricants and then adding the ability to suspend these lubricants into a paste, KG Products has developed one of the finest Leather Lubricants on the market today. Friction Coefficient of KG-9 once burnished into the leather will dramatically improve and will reduce the leather wear.

KG-10 2oz Micro Moly Dry Lube
	Code: A610 Price: $9.95
THE MOLY NO MESS LUBRICANT KG-10 Moly Dry film Lubricant is a highly effective MOS2 multi-purpose lubricant which greatly reduces friction and wear. KG-10 goes on wet, penitrates into the metal, drys leaving a pure Moly dry film that will protect and lubricate without artracting dirt or dust.Use KG-10 Dry Lube where a dry no-mess lubricant is required i.e. Triggers, slides, etc. Shake well before using. Apply KG-10 to areas you want lubricated. Allow to dry. You can accelerate the drying process by blowing on the film. Repeat process if you want to build up lubicant. Reassemle parts. Use KG-10 Dry Lube where a dry no-mess lubricant is required i.e. Triggers, slides, etc.

KG-100 Moly Armorkote Tumbler Kit
	Code: A100 Price: $26.95
The KG-100 Kit is for shooters who like dry Moly tumbler methods for coating bullets. The advantage of the Moly ArmorKote Kit over other kits sold on the market is you will not need to ruin a tumbler bowl or dedicate one just for tumbling. KG-100 uses no steel balls or waxes that can cause caking or buildup in the bore. KG-100 is a system that simply contains the bullets, keeps them tight together to minimize impact and thus distortion and you can do it in your existing tumbler.